Research
| Title： | Co-pyrolysis of waste polyvinyl chloride and oil-based drilling cuttings: Pyrolysis process and product characteristics analysis |
|---|---|
| First author： | Xia, Zebang; Yang, Hang; Sun, Jianfa; Zhou, Zejun; Wang, Jing; Zhang, Yi |
| Journal： | JOURNAL OF CLEANER PRODUCTION |
| Years： | 2021 |
| DOI： | 10.1016/j.jclepro.2021.128521 |
| Abstract： | Oil-based drill cuttings (OBDC) and waste polyvinyl chloride (waste PVC) both are solid wastes. The pyrolysis/ co-pyrolysis characterizations of OBDC, waste PVC and OBDC/waste PVC at varying heating rates were investigated using thermogravimetric analysis (TG/TGA). Coats-Redfern and Kissinger integration methods were employed to fit the TG curve. The optimal fitting effect was obtained with reaction order at 2 and Kissinger integration method was better than Coats-Redfern integration method for co-pyrolysis of OBDC/waste PVC. The practical co-pyrolysis condition was optimized using batch experiment and the optimal condition was as following: final temperature for 600 ?C, holding time for 60 min, heating rate at 10 ?C/min and ratio of PVC as 10% PO. The gas, solid and liquid phase products of pyrolysis/co-pyrolysis were characterized and analyzed using thermogravimetry-mass spectrometry (TG-MS), gas chromatography-mass spectrometry (GC-MS) and Xray diffraction (XRD). The gas product of pyrolysis/co-pyrolysis indicated the inhibitory effect on HCl emission due to the positive synergic effect of OBDC and PVC. High pyrolysis temperature was beneficial to increase the content of hydrocarbons, which enhanced the quality of oil recovery. This study indicated that the co-pyrolysis of OBDC and waste PVC is a promising method for waste disposal and oil recovery. |
